CHOOSING METAL BUILDINGS

Due to the wide clear span capability of metal buildings, many airport, both commercial and private, utilize them for airplane hangers. A steel structure is able to have a wider clear span than a wood truss building. Also metal superstructure provides extra head room due to the open gable construction. Wood truss buildings are only as high as the bottom of the trusses. Metal buildings are open all the way to the peak. Also an overall lower roof line on the outside provides less wind resistance. A metal building many times has an exterior roof pitch of 2×12 or 3×12 while a wood truss is many times 6×12 or more in order to gain enough structural strength in the trusses to cover the same wide span. Many metal buildings are 60 feet wide. Others can go 100′ wide with out any interior supports.

Now let’s look at all of this in conjuction with airplanes and airports. Airplanes need a very wide door to pass through. If a metal building is used with a width of 100′, then about 95′ feet or more can be open at one time. The entire end of the building can be left open or roll to the side doors can be designed for them. Also when inside the hanger, ladders and other things are needed for working on the different parts of the plane. The higher interior roof allows for such work to be performed.

On the outside, airports are notorious for the wind. A lower roof line to the entire building allows for the air to pass over it more easily than the wood truss. Also the lower roof line is an asset if a plane or ultra light is in the air. If there is less height to an obstacle, an plane in trouble may be able to avoid it.

Open construction buildings with very strong construction are ideal for industrial use and also private planes. There are many people who like to own a plane and use it for a hobby. At our local airport there is a whole line up of small private planes. There in one in particular that always catches our eye when it flies over. It is an orange bi-plane. Even our neighbor boy is getting in on the act with a small remote control plane. He hopes to join the air force someday and train to be a pilot. How many kids have gained an inspiration for something by being introduced to it, even by just living near a private airport with neat metal buildings in a row for airplane hangers. Some day you might even be looking for aircraft sales.

Metal building construction can be done by a Do-It-Yourself-er, or by a general contractor. There are many things to consider before selecting your metal building. The first step is to decide exactly what function the building is going to serve. If mixing a shop with a horse barn, or a garage attached to an existing building, be sure to contact your insurance first. There may be less permits and less expense if the metal building is free standing. Metal buildings are known for fire resistance, but if attached to a wood building or a garage may chance the way the insurance company looks at it. Also mixing a horse barn and a metal garage building with a shop can be a problem at times. The hay and shavings for horses can be looked at as an elevated liability, so consulting your agent before you begin is wise.

Once the exact purpose of the metal building is determined, a simple pencil sketch in a great next step. By thinking through exactly how you want the building laid out, doors and windows included and what size vehicles or machinery that will be passing through the door openings, you can begin your design process.

After an approximate size is determined and a pencil sketch is laid out, the next step is to begin looking for a supplier. There are several ways to do this. A simple Internet search can show companies with lots of photos, years of experience, and also some sites have pricing. Looking online gives a non-intrusive means to compare companies. If there are free dvds or brochures, go ahead and send away for them. The more informed you are, the more pleased you will be with the finished building. (Note: you may want to not include your phone number, an address and email address can keep them from cold calling you later).Many companies ship nationwide, so don’t be discouraged if the company that impresses you the most is 2,500 miles away. Also look on their website for a local representative.

Another great way to locate a reputable company is personal referral. If any neighbors or local businesses have erected a building in the last few years, stopping to talk with them about their experience is a great way to gain insight. People love to talk about their buildings, so don’t hesitate to stop in and ask a few questions. I know as log builders, I will gladly tell you companies that have been wonderful to deal with, and ones that are less than adequate.

A third way is to investigate your local phone book. A local representative will often be on site when the load arrives and inventory the con tense. Also they are available for Q and A during construction.

Once a company is selected, a metal building contractor might need to be found. This can be done by asking the metal building company for a list of contractors, or by contacting local builders directly. When choosing someone to entrust your project to, be sure to interview other people who have used them. Also be sure that the contractor has several years of experience in metal building construction, not just general construction. Visiting other building the builder has erected is also very important. Someone can sound competent, and know very little about the hands on construction.

All in all, do your research, be sure your contractor has the proper insurance and experience to handle your project, and visit building from your supplier of choice and from your builder. A nightmare can turn into reality when you see your building in shambles because your research was not good enough. As a child, my parents built a clear span 100′x200′ indoor horse riding arena from wood. Many years later they still have not quite recovered from seeing their dreams turned to match sticks by a “freak wind”. They thought they had a reputable contractor, but he had not built any buildings as large as this one. Do yourself a favor and be sure to view other  by a contractor before you hire them. Metal buildings can be the best investment you ever make. Durable, sturdy, insect resistant, and easy construction make it a great choice.

Thanks for reading! Sue

Metal building kits are pre-cut, pre-drilled, pre-welded, and ready for assembly. Large and small buildings can come this way. Smaller building kits for metal garage buildings, or smaller metal sheds and carports,  are suitable for homeowners or small business owners to erect themselves. Before site preparations are made, the building supplier should be chosen. It is a great help to the whole process if a simple pencil sketch is laid out. Then it can be presented to several different companies. Foundation and site requirements should be detailed by the supplier.

Before the metal building kit arrives, it is best to have all of the job site work done. It is not good for a package to sit on pallets or skids waiting to be erected. When the delivery arrives, work should commence shortly>

FOOTER AND SITE WORK

Metal buildings can be erected on gravel, dirt, or cement pads. Footers must be dug and the appropriate amount of cement poured into the holes. Many times anchor bolts are set into the cement so that the building can be attached to them. If pouring a cement pad for the floor of the building, the pad is usually poured after the footers are complete. A 4″ thick pad  of gravel should be spread evenly across the floor area. Then the pad is poured on top.

When the semi arrives with a package most likely a machine of some sort will have to be on site to unload. Semis do not usually carry their own means to unload, so this is a homeowner or general contractor expense. Depending on how heavy the bundles are, it can be unloaded with a sky lift, extend a boom, or a crane. Some kits are light enough that a fork lift can do the job. But the supplier should be asked ahead of delivery how much the heaviest bundle or piece weighs.

METAL BUILDING CONTRUCTION

OK, now forthe metal building construction. Each piece of the building is inventoried, then the superstructure starts. The piers are lifted and bolted at the bottom to the footers. Then the metal trusses are bolted together and lifted. Once in place they are bolted to the top of the piers. For some smaller buildings the truss may be on piece and simply bolted to the top of the piers on each side. For large span buildings, the truss itself is bolted together at the peak, lifted into place with the crane, and then bolted to the top of the piers.

Then the other metal purlins and components to the superstructure are lifted into place and bolted to the framework. Like a huge erector set, the building begins to take shape.

Once the superstructure is completed, the metal sides are installed. Any cutting for door and window openings are cut in at this point. Some times metal is already cut and ready to be just screwed up. The building that I helped with, there was some cutting required on most of the pieces.

Next the roof sheeting is screwed into place. For both the siding and the roof all of the screws were supplied with the building kit. The screws were self tapping, and a rubber or vinyl ring at the base of them, and the heads were painted to match the outside color of the steel building.

After the metal siding and roofing is  installed the doors and windows are installed.

All in all the metal building kits are easy to assemble, reasonable on time requirements for erection, and required little cutting (only on the siding and metal roofing).